ASTM D1004
TearTear resistance (Graves tear) of plastic film and sheeting — initiation tear.
Tear
Tear Strength Tester
A cut or notched specimen is pulled so the tear propagates from the flaw, giving tear strength — the number that matters once a part is already damaged.
Runs onSeries 7200
ASTM D1938
TearTear propagation resistance (trouser tear method) of plastic films.
ASTM D1938 / D1004
TearTrouser tear and graves tear of films.
ASTM D2261
TearTearing strength of fabrics by the tongue (single rip) procedure (CRE machine).
ASTM D412 / D624 / D575
TearEngine mounts, bushings, seals and weatherstrips — tensile, tear and compression of elastomers.
ASTM D4533
TearTrapezoid tearing strength of geotextiles.
ASTM D624
TearTear strength of conventional vulcanized rubber and thermoplastic elastomers (Die A, B, C and trouser).
ISO 13937
TearTongue and trouser tear of fabrics.
ISO 13937-2 / -3 / -4
TearTear properties of fabrics — trouser, wing and tongue-shaped specimens.
ISO 1974
TearPaper — tearing resistance (Elmendorf reference; trouser tear on UTM as supplementary).
ISO 23910
TearLeather — stitch tear resistance (upholstery and footwear seam design).
ISO 3377-1 / -2
TearLeather — tear load: single-edge and double-edge (Baumann) tear.
ISO 34-1
TearTear resistance of compounds for tyres, belts and moulded goods.
ISO 34-1 / -2
TearTear strength of rubber — trouser, angle (Die C) and crescent test pieces; small (Delft) test pieces.
ISO 4674-1
TearTear resistance of rubber- or plastics-coated fabrics.
ISO 505
TearConveyor belts — method for determination of tear propagation resistance of textile belts.
ISO 6383
TearTear propagation of film packaging; easy-open feature validation.
ISO 6383-1 / -2
TearTrouser tear and Elmendorf tear resistance for plastic films and sheeting.
ISO 8067
TearTear strength of flexible cellular polymeric materials.
ISO 9073-3 / -4
TearNonwovens — strip tensile and trapezoid tear (hygiene, medical, filtration, wipes).
Showing 1–8 of 20 standards
Next
Tell us the specimen, not just the standard.
Thickness, width and expected break force decide the grip as much as the method does. Send us those and we will specify the frame, the load cell and the fixture around them.