ASTM D642
CompressionBox compression test — compressive resistance of shipping containers (requires large-platen UTM/compression tester).
Paper, board & corrugated
Paper And Board Testing Machine
Filter by test type, industry or standards body, or search a designation directly. Where a method has an equivalent under another body, both are shown.
Runs onSeries 7200
ASTM D828
TensileTensile properties of paper and paperboard using CRE apparatus.
ASTM F1140
Creep & relaxationInternal pressurization failure resistance of unrestrained packages (companion to F88).
ASTM F88 / F88M
Peel & adhesionSeal strength of flexible barrier materials — heat-sealed pouches and medical packaging.
EN 868
TensilePackaging for terminally sterilized medical devices — seal strength verification (references F88-type peel).
ISO 11607-1
TensilePackaging for terminally sterilized medical devices — seal strength verification (references F88-type peel).
ISO 12048
CompressionBox compression test — compressive resistance of shipping containers (requires large-platen UTM/compression tester).
ISO 12192
CompressionPaper and board — compressive strength by ring crush method.
ISO 12625-4 / -5
TensileTissue paper and tissue products — tensile strength, stretch and wet tensile strength.
ISO 1924-2 / -3
TensilePaper and board — tensile properties (constant rate of elongation, 20 and 100 mm/min).
ISO 1974
TearPaper — tearing resistance (Elmendorf reference; trouser tear on UTM as supplementary).
ISO 3035
CompressionCorrugated fibreboard — flat crush resistance.
ISO 3037
CompressionCorrugated fibreboard — edgewise crush resistance.
TAPPI T494
TensileTensile properties of paper and paperboard using CRE apparatus.
TAPPI T811
CompressionCorrugated fibreboard — edgewise crush resistance.
TAPPI T822
CompressionPaper and board — compressive strength by ring crush method.
TAPPI T825
CompressionCorrugated fibreboard — flat crush resistance.
TAPPI T826
CompressionShort-span compressive strength of containerboard.
Showing 1–8 of 18 standards
Next
Tell us the specimen, not just the standard.
Thickness, width and expected break force decide the grip as much as the method does. Send us those and we will specify the frame, the load cell and the fixture around them.