ASTM C109
CompressionCompressive strength of hydraulic cement mortars (50 mm cubes).
Wood, concrete & ceramics
Concrete And Wood Testing Machine
Filter by test type, industry or standards body, or search a designation directly. Where a method has an equivalent under another body, both are shown.
Runs onSeries 7200
ASTM C1161
Flexure & bendFlexural strength of advanced ceramics at ambient temperature.
ASTM C1424
CompressionMonotonic compressive strength of advanced ceramics.
ASTM C1499
Flexure & bendEquibiaxial flexural strength of advanced ceramics (ring-on-ring) — also applied to glass discs.
ASTM C158
Flexure & bendFlexure testing of glass (determination of modulus of rupture).
ASTM C39
CompressionCompressive strength of cylindrical concrete specimens.
ASTM C496
TensileSplitting tensile strength of cylindrical concrete specimens.
ASTM C78 / C293
Flexure & bendFlexural strength of concrete beams (third-point and centre-point loading).
ASTM D143
TensileSmall clear specimens of timber — static bending, compression parallel/perpendicular, shear, tension.
ASTM D198
Flexure & bendStatic tests of lumber in structural sizes.
ASTM E488
ShearStrength of anchors in concrete elements (cast-in and post-installed anchor pull-out).
EN 12390-3 / -5
Flexure & bendTesting hardened concrete (European suite) — compressive and flexural strength of specimens.
EN 1288-3
Flexure & bendGlass in building — bending strength by four-point bending of flat glass.
EN 310
Flexure & bendWood-based panels — modulus of elasticity in bending and bending strength.
EN 319
TensileParticleboards and fibreboards — internal bond (tensile strength perpendicular to plane).
IS 15658
Flexure & bendPrecast concrete paver blocks — strength requirements.
IS 1734
TensileIndian Standard methods of test for plywood — static bending, glue shear strength. Equivalent to: EN 310 / 314-adjacent
IS 2770
Peel & adhesionBond strength between reinforcing steel and concrete — pull-out test.
IS 3495
CompressionBurnt clay building bricks — compressive strength.
IS 516
Flexure & bendIndian Standard — compressive and flexural strength of hardened concrete (cubes, beams).
ISO 10545-4
Flexure & bendCeramic tiles — modulus of rupture and breaking strength (3-point bend).
ISO 1288-3
Flexure & bendGlass in building — bending strength by four-point bending of flat glass.
Showing 1–8 of 22 standards
Next
Tell us the specimen, not just the standard.
Thickness, width and expected break force decide the grip as much as the method does. Send us those and we will specify the frame, the load cell and the fixture around them.